Reducing The After-Image Of Fast-Moving Images (Clear Motion Drive (C.m.d.)); Viewing High Contrast Images (Lens Aperture) - JVC DLA-X900R Instructions Manual

Reducing the After-image of Fast-moving Images (Clear Motion Drive (C.M.D.))

Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique that supports 3D images.
For some scenes, interpolation may cause distortion in the image. In this case, set to "Off".
Original Image
Interpolation Enabled
Intermediate Frame Generation
.
INPUT
Viewing High Contrast Images (Intelligent Lens Aperture)
JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls
the aperture intellectually according to the image information.
This technology enables viewers to enjoy video images with enhanced contrast.
INPUT
44
Intermediate Frame Generation
Press the [C.M.D.] button
1
Pressing the [C.M.D.] button each time switches the mode in the following
0
sequence: "Off"""Low"""High"""Inverse Telecine"""Off"...
Setting
Off
Low
High
Inverse Telecine
* C.M.D. is the abbreviation for Clear Motion Drive.
* The [C.M.D.] button is positioned differently on the remote control depending on the
model in use. (p. 17)
Press the [LENS AP.] button
1
Pressing the [LENS AP.] button each time switches the setting in sequence.
Setting
Auto 1 Image contrast is enhanced.
Auto 2 Places emphasis on the gradation.
Manual Does not perform dynamic control.
Select this setting to perform adjustment manually.
* 1 When the setting is changed to Auto after performing manual adjustment, the value
set manually will be used as the aperture value for Auto.
Description
Interpolation is not performed.
Softens the image quality.
Image quality becomes softer than that of the "Low" setting.
60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
Does not function for 24p video images.
0
Description