Precautions during Mounting
Securing (mounting) the projector
When this unit is to be mounted to a fixed position for
0
use, install it horizontally.
Make sure to secure the main unit to prevent accidents
0
such as during an earthquake.
Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the feet.
Lift the unit and adjust the four feet.
Extend
Feet
Securing with screws
Remove the four feet at the bottom, and fasten using the
screws (M5 screws, 15 to 25 mm).
* Using screws other than those designated may cause
the unit to break down.
* Do not use 2 adjacent locations (A+B, B+C, C+D, D
+E) only.
Contract
4 Locations
4 Locations
21