How To Stop And Restart The Cd Player; How To Locate A Selection On Your Cd Player Using Automatic Music Search (Ams) - Ford 1996 Mustang Manual

NOTE: Once a disc is inserted, the disc
opening is secured to prevent the
accidental insertion of a second disc.
NOTE: The CD player has heat protection
circuitry to protect the laser diode. If
the temperature of the player reaches
167˚F (75˚C), the heat detection circuit
will shut off the player and "HOT"
will appear in the display. When the
temperature is within normal operating
range, the "HOT" indication will turn
off and the CD player will again be
operational.

How to stop and restart the CD player

When a disc is loaded, the unit automatically
enters the play mode and the play indicator ( a )
illuminates. To stop temporarily, press the
"PLAY/STOP" button. The stop indicator ( X ) in
the display illuminates and operation returns to
the radio or tape mode. To resume CD play,
press this button once again or press any other
function button (except "EJECT" or
"COMPRESS" buttons).
NOTE: If the ignition key is turned OFF
during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.
How to locate a selection on your CD
player using Automatic Music Search (AMS)
An "AMS" (Automatic Music Search) control on
your CD player allows you to quickly find a
particular selection on the disc. Press the left
f side of the "AMS" control to locate a
previous selection or the right e side of the
"AMS" control to locate a later selection.
156