Ford 1996 Mustang Manual page 162

Using the "SCAN" function
Pressing the "SCAN/TUNE" button once
enters the scan mode (display will indicate
"SCN"). Pushing the right ( a ) side of the
"SEEK" button will begin the scan mode up
the frequency band, stopping on each
listenable station for approximately a
five-second sampling. Pushing the left ( b )
side of the "SEEK" button will begin the scan
mode down the frequency band, again
stopping on each listenable station for
approximately a five-second sampling.
To stop the scan mode on the presently
sampled station press the "SCAN/TUNE"
button again.
Setting the Station Memory Preset buttons
Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2).
Follow the easy steps below to set these buttons
to the desired frequencies:
1. Select a band, then select a frequency.
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset button you want to set.
165