How To Turn The Radio On And Off; How To Adjust The Volume - Ford 1996 Mustang Manual

Mach 460 Sound System
Using the Controls on Your New Radio

How to turn the radio on and off

Press the "POWER" button to turn the radio on.
Press it again to turn it off.

How to adjust the volume

Press the +/ side of the "VOLUME" button to
increase/decrease volume. Bars illuminate in the
display to show the relative volume level.
NOTE: If the volume level is set above a
certain listening level when the
ignition switch is turned off, when the
ignition switch is turned back on, the
volume will come back to a "nominal"
listening level. However, if the radio
power is turned off, the volume will
remain in the position it was set at
when radio power was switched off.
Selecting the AM or FM frequency band
Push the "AM/FM" button to select the desired
frequency band or to stop/store cassette tape
(when in cassette mode). Pushing the button
more than once will alternate between AM, FM1
and FM2. These functions are used with the
station memory buttons described under How to
tune radio stations.
How to tune radio stations
There are four ways for you to tune in a
particular station. You can manually locate the
station using the "SCAN/TUNE" button,
"SEEK" the station, "SCAN" to the station or
select the station by using the memory buttons,
which you can set to any desired frequency.
These four methods are described below.
163