Using The “Ams” Function To Manually Tune Your Radio; Using The “Seek” Function - Ford 1996 Mustang Manual

Using the "AMS" function to manually tune
your radio
You can change the frequency up or down
one increment at a time by first pressing the
"AMS" button, (display shows "TUNE") then
pressing and releasing either the right a or
left b side of the "SEEK" button. To change
frequencies quickly, press and hold down
either the right or left side of the "SEEK"
button.
Manual tuning adjusts your radio to any
allowable broadcast frequency, whether or
not a station is present on that frequency.
(See All About Radio Frequencies in this
section.)
Using the "SEEK" function
This feature on your radio allows you to
automatically select listenable stations up or
down the frequency band. Press the right
( a ) side of the "SEEK" button to select the
next listenable station up the frequency band.
Press the left ( b ) side of the button to select
the next listenable station down the
frequency band. By holding the button down,
listenable stations can be passed over to reach
the desired station.
Using the "SCAN" function
Press the "SCAN" button to enter the scan
mode. The radio will begin scanning up the
frequency band, stopping on each listenable
station for approximately a five-second
sampling. This continues until you press the
"SCAN" button a second time. The display
flashes "AM" or "FM."
143