Checking Hoses; Adding Engine Coolant - Ford 1996 Mustang Manual

Checking Hoses

Inspect all engine and heater system hoses and
hose connections for deterioration, leaks, and
loose hose clamps as specified in the Maintenance
Schedule and Record booklet. Repair or replace
with Motorcraft hoses or equivalent as necessary.

Adding Engine Coolant

Do not put engine coolant in the container
for the windshield washer fluid.
If sprayed to clean the glass, engine coolant or
antifreeze could make it difficult to see through
the windshield.
Never remove the radiator cap or vent
plug while the engine is running or hot.
Follow these steps to avoid personal injury that
can be caused by escaping steam or engine
coolant.
1. Before you remove the cap, turn the engine
off and let it cool. Even when the engine is
cool, be careful when you remove the
radiator cap or vent plug.
2. When the engine is cool, wrap a thick towel
around the cap and turn it slowly
counterclockwise to unscrew.
3. Step back while the pressure releases.
4. When you are sure that all the pressure has
been released, use the cloth to press the cap
down, turn it, and remove it.
254
RWARNING
RWARNING