How To Stop And Restart The Cd Player; How To Fast Forward Or Reverse Your Cd Player - Ford Thunderbird Owner's Manual

NOTE: The CD player has heat protection
circuitry to protect the laser diode. If
the temperature of the player reaches
167˚F (75˚C), the heat detection circuit
will shut off the player and "TOO
HOT" will scroll in the display for
approximately five seconds (radio will
resume playing). When the temperature
returns to normal operating range, the
CD player will again be operational.

How to stop and restart the CD player

When a disc is loaded, the unit automatically
enters the play mode and the play indicator a
illuminates. To stop temporarily, press the
"PLAY/STOP" button or the "AM/FM" button.
The stop indicator X in the display illuminates
and operation returns to the radio mode. To
resume CD play, press the "PLAY/STOP"
button once again.
NOTE: If the ignition key is turned OFF
during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.
How to fast forward or reverse your CD
player
To quickly search for a particular point in a
selection, press the "FF" button (to fast forward)
or the "REV" button (to reverse). While either
button is pressed, the disc goes forward or
backward at two different speeds depending on
how long the button is held down. (Pressing
either button for more than three seconds will
speed up the process.) Release the button at the
desired point (found by watching the elapsed
playing time in the display or by listening to the
33