High Beams; Flashing The Lights; Windshield Wipers And Washer - Ford 1996 Mustang Manual

If the turn signal stays on after you turn, move
the lever back to the center (off) position.
For lane changes, move the lever far enough to
signal but not to latch. The lever will return to
the off position when you release it.

High Beams

To turn on the high beams, turn the headlamp
control knob to the headlamp ON position and
push the turn signal lever away from you until
it latches. When the high beams are ON, the
high beam indicator light on the instrument
panel comes on.
To turn off the high beams, pull the lever
toward you until it latches. The high beam
indicator light turns off.
NOTE: The fog lamps will turn off if you put
high beams on while fog lamps are on.

Flashing the Lights

To flash the headlamps, pull the lever toward
you for a moment and then release it. The
headlamps will flash whether the headlamp
knob is in the on or off position.

Windshield Wipers and Washer

To turn on the windshield wipers, the ignition
key must be turned to the ON or ACC position.
Rotate the end of the lever away from you to
activate the wipers. The first seven detents are
interval wipe positions, the eighth detent is the
LO position and the ninth detent is the HI
position.
To turn the wipers off, turn the knob toward
you to the OFF position.
92