Setting Outdoor Unit Dn Codes (O.dn) - Toshiba RBC-AMTU31-E Owner's Manual

 Setting outdoor unit DN
codes (O.DN)
Only types of unit having the relevant function can be
controlled.
How to set an outdoor unit DN code from
the wired remote controller
3
4
7
1
Push +
button) buttons simultaneously for 4
seconds or more.
(In the case of group control, the "UNIT No."
displayed first is the number of the header unit.)
2
To shift from the header unit [U1] to another
unit, push
select the No. of the desired outdoor unit.
The fan of the selected outdoor unit starts to
operate.
3
Specify "CODE No." with
4
Use buttons to change the setting
being displayed to the desired setting.
5
Push button.
6
After making the above change, push
(left side of the button) to check the
new setting.
7
Push the
* Type of outdoor unit that does not have a function,
although the display itself changes after the
procedure in step 1. However, neiter the code nor
the setting will not be displayed, and the display will
be back to the previous one.
23-EN
5 1 2, 6
+ UNIT LOUVER (right side of the
(left side of the button) to
buttons.
button to finish the setting.
Owner's Manual