Application Control; Power Saving Mode; Performing Settings Of The Power Saving Mode - Toshiba RBC-AMTU31-E Owner's Manual

6

Application control

 Power saving mode
The power saving mode saves energy by limiting the
maximum current which will effect heating or cooling
capacity that the unit can generate.
Push button during operation.
• The air conditioner enters power saving mode.
• appears on the display.
Power saving mode will stay in effect until it is
cancelled.
To cancel the power saving mode, push
button again.
• disappears.
17-EN
 Performing settings of the

power saving mode

* When group control is performed in a complex
system, it is necessary to configure the settings for
each outdoor unit.
* This function is not available depending on the type
of unit connected.
1
Push button for 4 seconds or more
when the air conditioner is not working.
flashes.
Indicates "CODE No." [C2].
2
Select an indoor unit to be set by pushing
(left side of the button).
Each time the button is pushed, unit numbers
change as follows:
UNIT No. UNIT No.
1-1 1-2
UNIT No.
1-4
The fan of the selected unit runs.
3
Adjust the power save setting by pushing
buttons.
Each push of the button changes the power level
by 1% within the range from 100% to 50%.
*The factory default is 75%.
Setting of power level in
power saving mode
4
Determine the setting by pushing
5
Push button to complete the setting.
Owner's Manual
UNIT No.
1-3
button.