Table of Contents
Advertisement
+00EH97062301.book Page 27 Thursday, March 17, 2011 10:51 AM
Lite-Vision plus Remote Controller
5. DN setting
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
DN setting
Code
(DN)
Data
10
0000
Return
Fix
<
DN setting
Code
(DN)
Data
10
0001
Return
Fix
<
DN setting
Continue?
Return
Yes
>
>
No
– 27 –
1
∧
Push the [
] / [
"5. DN setting" on the "Field setting menu"
screen, then push the "
F2] button.
The fan and louver of the indoor unit operate.
When the group control is used, the fan and
louver of the selected indoor unit operate.
Move the cursor to select "DN code" with the
< " [
"
F1] button, then set "DN
<
∧
code" with the [
Move the cursor to select "data" with the
> " [
"
F2] button, then set "data"
>
∧
with the [
] / [
2
Refer to the Installation Manual supplied
with the indoor unit or service manual for
details about the DN code and data.
3
Push the [
MENU] button to set the other
DN codes. After "Continue?" is displayed
on the screen, push the "
[
F1] button.
4
Push the "
No
finish the setting operation. " " appears on
the screen for a while, then the screen
returns to the "Field setting menu" screen.
Pushing the "
No
displays the unit selection screen when the
group control is used. Push the [
button on the unit selection screen to finish the
setting operation. " " appears on the screen for
a while, then the screen returns to the "Field
setting menu" screen.
Installation Manual
∨
] button to select
Set" [
Set
∨
] / [
] button.
∨
] button.
Yes"
Yes
No" [
F2] button to
No" [
F2] button
CANCEL]
Advertisement
Table of Contents
