Table of Contents
Advertisement
■8.
Easy I.DN setting
Sets various functions related to air conditioners.
REQUIREMENT
Be sure to stop operation of the air conditioners.
Item
1. High-ceiling adjustment
2. Filter sign timer
3. Heating temp. shift
4. TA sensor selection
5. External static pressure
6. Automatic restart
7. Set temp. unit
8. Set temp. range
9. Individual ventilation
10. Occupancy sensor
11. Virtical louver range
12. Auto mode setting
1
In the "Field setting menu" screen, press
[
and then press [
The fans and louvres of the indoor units operate.
When doing group connections:
The fans and louvres of the selected indoor units
2
Press [
Press [
3
After setting each item, press [
The changes are fixed, and the "Field setting menu"
" " appears while data is changing.
When doing group connections:
After finishing "Easy I.DN setting" for each unit, press
Sets the fan speed, such as for high-ceiling installations and for operations with
high-performance filters.
For selectable data, refer to the Installation Manual of the indoor unit.
The timing at which the filter check mark
to the installation conditions.
For selectable data, refer to the Installation Manual of the indoor unit.
The temperature at which heat is detected can be changed so heating is more
effective.
By selecting "Body", control can be done by the temperature of the room
temperature sensor of the indoor unit. By selecting "RC", control can be done by
the temperature of the temperature sensor on the remote controller.
Sets the external static pressure. For selectable data, refer to the Installation
Manual of the indoor unit.
Set "ON" to do automatic restart when a power outage occurs.
Select from "°C" (Celsius) or "°F" (Fahrenheit) as the units of temperature
displayed on the remote controller.
Units of "1°C" can be selected as the display for the set temperature.
* The "°F" (Fahrenheit) display does not support units of "0.5°C".
Set "ON" to do individual ventilation.
Set "ON" when the indoor unit is equipped with a occupancy sensor.
Set the range of swing motion of the vertical louver.
Set the optional functions when the operation mode is "Auto".
0: No function, 1: Prohibited, 2: Dual set point
– 36 –
] and [
] to select "Easy I.DN setting",
Set/Fix]
operate.
] and [
] to select an item
] and [
] to switch to the setting you
want, or set a numerical value.
screen returns.
[
Set/Fix] to fix the changes and return to the unit
selection screen. In the unit selection screen, press
[
Return] to briefly display " ", and then return to
the "Field setting menu" screen.
Description
"
"
appears can be changed according
Installation Manual
Set/Fix]
EN
Advertisement
Table of Contents
