Louver Direction - Toshiba RBC-AMTU31-E Owner's Manual

5

Louver direction

Only types of unit having a wind direction adjustment function can be controlled.
For precautions for use of the air conditioner, refer to the air conditioner owner's manual.
◆ To set the louver direction
1
Push the
SWING/FIX
The louver direction changes with each push of
the button.
▼ For heating
Point the louver downward.
If not pointing downward, hot
air may not reach the floor.
▼ For cooling
Point the louver horizontally.
If pointing downward, dew
may form on the surface of
the air discharge port and
may drop down.
▼ For fan
Select a wind direction.
◆ To start swinging
1
Push the SWING/FIX
louver direction to the lowest position, then
SWING/FIX
push
The SWING
louver begins swinging.
▼ In all operations
11-EN
button during running.
Initial setting
Initial setting
Initial setting
button repeatedly to set the
again.
indicator is displayed and the
Repeat
◆ To stop swinging
1
SWING/FIX
Push the button at the desired
position while the louver is swinging.
SWING/FIX
• Push the button repeatedly to change
the louver position again.
* However, even if the
while the louver is swinging, one of the
indications below may sometimes be displayed
and may not set the louver to the highest
position.
▼ Indications when swinging is stopped
FAN / HEAT
In this case, push the
seconds.
* In COOL / DRY operation, the louver does not
stop as it directs downward. If stopping the
louver as it directs downward during swing
operation, it stops after moving to the third
position from the highest position.
▼ Indications when swinging is stopped
FAN / HEAT
operation
Owner's Manual
SWING/FIX
button is pushed
COOL / DRY
SWING/FIX
button again after 2
COOL / DRY
operation