Setting Louver Position - Toshiba RBC-AMS54E Installation Manual

5. Setting louver position

The louver indication setting can be changed.
Setting louver position
1.Fixed position indication
ON / OFF
2.Operation mode
Up/Down / Left/Right
Return Fix
Change the flap position indication for when swinging is cancelled in [Fixed position
indicator].
When "ON" is selected, the louver stops and the indication becomes as shown on the right
when swinging is cancelled.
(Factory default)
When "OFF" is selected, the stop position and indication becomes as shown on the right
after swinging is cancelled.
Change the louver operation direction indication in [Operation mode].
When "Up/Down" is selected, the louver operation direction indication becomes as shown
on the right.
(Factory default)
When "Left/Right" is selected, the louver operation direction indication becomes as shown
on the right.
This can be used with a model whose louver moves left and right.
1
Push the [
"5. Setting louver position", then push the
" Set" [
Set
"Impossible" is displayed in the case of a model
for which the wind direction cannot be set.
 is displayed for the selected item.

2
Push the [
an item on the "Field position indication"
screen.
The highlighted item can be set.
○
Move with the "
"
setting.
3
After setting each item, push the "MENU"
[ MENU] button to confirm the changes
to the settings.
– 28 –
Installation Manual
 
] / [ ] button to select
F2] button.
 
] / [ ] button to select

" [

" [
F2] button to set the

F1] /
EN