Setting Louver Position - Toshiba RB-RWS21-E Installation Manual

5. Setting louver position

The louver indication setting can be changed.
Field setting menu ( 1/2 )
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Return
Set
Setting louver position
1.Fixed position indication
ON / OFF
Return Fix
Change the flap position indication for when swinging is cancelled in [Fixed position
indicator].
When "ON" is selected, the louver stops and the indication becomes as shown on the right
when swinging is cancelled.
(Factory default)
When "OFF" is selected, the stop position and indication becomes as shown on the right
after swinging is cancelled.
1
Push the [
"5. Setting louver position", then push the
" Set" [
Set
"Impossible" is displayed in the case of a model
for which the wind direction cannot be set.
 is displayed for the selected item.

2
Push the [
an item on the "Fixed position indication"
screen.
The highlighted item can be set.
○
Move with the "
"
setting.
3
After setting each item, push the [
button to confirm the changes to the
settings.
– 28 –
Installation Manual
∧ ∨
] / [ ] button to select
F2] button.
∧ ∨
] / [ ] button to select
←
" [

→" [
F2] button to set the

MENU]
F1] /
EN