Land Pride RC4610 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Farm Equipment
  5. RC4610
  6. Operator's manual

Land Pride RC4610 Operator's Manual

Rotary cutters
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Rotary Cutters
RC4610 (540 RPM) and RCM4610 (1000 RPM)
39186
Table of Contents
Read the Operator's Manual entirely. When you see this symbol,
!
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
334-144M
Operator's Manual
Printed 1/14/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RC4610 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Land Pride RC4610

Summary of Contents for Land Pride RC4610

  • Page 1 Table of Contents Rotary Cutters RC4610 (540 RPM) and RCM4610 (1000 RPM) 39186 334-144M Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit.

  • Page 2: Machine Identification

    Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov RC4610 (540 RPM) and RCM4610 (1000 RPM) Rotary Cutters 334-144M 1/14/19...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 5: Important Safety Information

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.

  • Page 6: Tire Safety

     Lower implement to the ground and  Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only.  Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance.
  • Page 7 Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Never carry riders on tractor or structures (ROPS) and seat belt implement.

  • Page 8: Safety Labels

    Some new equipment installed during repair requires with a similar type of straight edge. safety labels to be affixed to the replaced component as 37586 818-830C Safety Combo! 1 - Place: On wing deck RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 9 Caution: Use with 1000 rpm power take-off only 39188 39190 39188 818-552C Danger! Rotating Driveline Entanglement Hazard 3 - Places: Top of divider gearbox shield, on wing driveline shield, and on main driveline shield 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 10 2 - Places: On both ends of center axle 39188 39189 818-142C Danger! Rotating Driveline 2 - Places; On top of splitter box input shaft guard and wing gearbox shaft guard RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 11 Danger! Shield Missing - DO NOT Operate 2 - Places: On main and wing driveline profiles 39191 39189 818-543C Danger! Guard Missing, DO NOT Operate 2 - Places: Beneath blade spindle gearbox shields 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 12 1 - Place: On center deck 39189 818-561C Warning! Raised Wing Hazard 1 - Place: On wing deck 39188 818-276C Warning! Rotating Blade Hazard 1 - Place: On center deck RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 13 Table of Contents Important Safety Information 39187 818-556C Danger! Thrown Object Hazard 1 - Place: On wing 39187 818-564C Danger! Rotating Blade 1 - Place: On wing 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 14 1 - Place: On top of hitch frame 39188 39188 838-094C Warning! High Pressure 1 - Place: On top of hitch frame 39188 838-588C Warning! Speed Warning 1 - Place: On top of hitch frame RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 15 2" x 9" Red Reflector 1- Place: Back side of wing transport lock bar 39187 838-614C 2" x 9" Red Reflector 1 - Place: Back side wing rear axle 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 16 838-615C 2" x 9" Amber Reflector 2 - Places: Both sides of center axle 39188 838-615C 2" x 9" Amber Reflector 1 - Place: Front side of weight box RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 17: Using This Manual

    Land Pride Service Department 1525 East North Street NOTE: A special point of information that the P.O. Box 5060 operator should be aware of before continuing. Salina, Ks. 67402-5060 E-mail address lpservicedept@landpride.com 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 18: Section 1: Assembly & Set-Up

    Before You Start RC4610 ......540 rpm Read and understand the Operator’s Manual for your RCM4610.

  • Page 19: Hitch Types

    Cutter rotation about the tractor drawbar is limited to movement about the pintle connection. The pintle hitch is ideal for a drawbar hammer strap. 27928 Pintle Hitch Figure 1-6 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 20: Hitch Assembly

    6. Wait for all components to come to a complete stop before leaving the operator’s seat. Use steps, grab-handles and anti-slip surfaces when stepping on and off the tractor. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 21: Standard Clevis Hitch Hook-Up

    Lock chain hook securely to the tractor drawbar. Drawbar should fit between lower safety chain. and upper plates of clevis. 16. Continue with “Hydraulic Hook-up” on page 20. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 22 6. Start tractor, raise 3-point arms fully up, and carefully necessary to permit turning. Lock chain hook back tractor within close proximity of clevis (#9). securely to the safety chain. 18. Continue with “Hydraulic Hook-up” on page 20. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 23: Bar-Tite Hitch Hook-Up

    13. Continue with “Hydraulic Hook-up” on page 20. before working on or around an unhooked cutter. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 24: Hydraulic Hook-Up

    8. Tighten locknuts (#2) until snug. Do not over tighten. raising and lowering the deck, folding the wing, and Wing axle must be able to pivot in the field. while making turns with the tractor. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 25 (#2) as shown in Figure 3-2 on page 36. Secure with hairpin cotter (#1). 6. Restart tractor and lower wing with tractor hydraulic control lever until wing is on the ground. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 26: Driveline Assembly

    (#5) on hanger. Final adjustments to hanger Figure 1-17 will be made after tractor hook-up. Refer to Figure 1-17: Remove hex whiz nuts (#4A), carriage bolts (#3), and shipping bracket (#2). Discard shipping bracket. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 27: Driveline Hook-Up

    If park jack (#7) is attached to the hitch, it should be removed and stored on the wing. For detailed instructions, see steps 15 & 16 on page 18. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 28: Driveline Clearance Check

    11. Tighten 3/8"-16 GR5 bolts (#3) to the correct torque. IMPORTANT: Always rotate driveline hanger down before moving cutter to prevent damage to driveline. 12. Rotate driveline hanger (#2) down. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 29: Purge Hydraulic System

    5. Restart tractor and slowly activate tractor control lever to retract wing cylinder (#1), and to purge trapped air from the hydraulic system. 6. Tighten hose fitting at the wing cylinder. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 30 Refer to Figure 1-24: 5. Mount magnetic light assembly (#5) vertically on the end of the weight box as shown with rear facing amber light above the rear facing red light. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 31 Figure 1-26 Remove and discard all four shipping lugs (#1) and attaching hardware (#2 & #3). 39632 Remove Shipping Lugs Figure 1-27 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 32: Unhook Rotary Cutter

    Hydraulic Lift Cylinder With Stroke Control Spacers 21. Adjust park jack (#3) to raise cutter up until all load is Figure 1-30 removed from tractor drawbar. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 33 Remove hitch (#10) from tractor drawbar and reattach it to cutter hitch (#9) with removed bolt (#1) and locknut (#2). Screw locknut on 4 or 5 full turns. Do not torque nut tight. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 34: Section 2: Adjustments

    See cover picture for correct Be sure both sides are equal distance from ground to positioning. continuous hinges and that left and right leveling rods have equal tension. Re-tighten jam nut (#3). RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 35 If outer wing edge is lower than the center deck, loosen jam nut (#1) and rotate turnbuckle (#2) counterclockwise to raise outer wing edge until wing is level. Tighten jam nut (#1) to the correct torque when level. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 36: Adjust Cutting Height

    (#2) that will fit on the center hydraulic cylinder rod. The following spacers are available. • Two 1" spacers • One 1 1/4" spacer • One 1 1/2" spacer • One 1 3/4" spacer RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 37: Start-Up Checklist

    Consult your tractor’s condition to avoid driveline entanglement and projectiles manual for acceptable inclines the tractor is capable of flying off of the driveline. traveling across. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 38: Section 3: Operating Instructions

    Always remove the implement from use until the damaged driveline can be repaired or replaced. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 39: Blade Operation Inspection

    8. Check blades for a locked-up situation. Unlock blades if locked-up. 9. Check for other probable causes such as broken or bent blades, loose blades, loose gearbox mounting bolts, and bent driveline. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 40: Transport Lock

    3-point arms do not make contact with cutter hitch, driveline or deck. Keep lower 3-point arms raised at all times when hitched to a pull-type cutter. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 41: Field Set-Up

    Wet material will build up on the deck underside causing additional power consumption, Adjust cutter to field cutting height. See “Adjust high wear, and poor discharge. Cutting Height” on page 32 for detailed instructions. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 42 6. Periodically, disengage power take-off, stop tractor, place gear selector in park or set park brake, turn off tractor, remove switch key and wait for blades to stop rotating before dismounting tractor. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 43 It really pays to inspect a new area and to develop a safe plan before cutting. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 44: Section 4: Options & Accessories

    Refer to Figure 4-1: Land Pride offers two types of safety guards to best suit This kit is for tractors needing an additional duplex outlet. your application: single row chain guards and double row It converts the tractor’s duplex outlets into two duplex...

  • Page 45: Installation Instructions

    Pull hook (#5) and cable (#6) out past the gearbox. e. Tighten hydraulic fitting (#8). f. Connect hydraulic hoses to the tractor. g. Purge hydraulic system of air. See “Purge Hydraulic System” on page 25. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 46: Section 5: Maintenance & Lubrication

    Replace your tractor’s hydraulic filter element at the prescribed intervals. These simple maintenances will go a long way to prevent occurrence of control valve and hydraulic cylinder problems. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 47 2 802-466C PLOW BOLT, 3/8" - 16 x 1 1/4" grade 5 3 803-198C NUT HEX WHIZ 3/8" - 16 PLT Weight Box Skid Shoe Figure 5-4 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 48: Cutter Blade Maintenance

    Never try to straighten a bent blade! Small nicks can be ground out when sharpening. Refer to Figure 5-6 on page 45 when ordering Land Pride replacement blade components. Remove cutting blades and sharpen or replace as follows: Place tractor gear selector in park and/or set brakes, shut engine off and remove ignition key.
  • Page 49 Both blades should weigh the same with not more than 1 1/2 oz. difference. Unbalanced blades will cause excessive vibration which can damage gearbox bearings and create structural cracks. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 50: Drivelines With Slip Clutches

    8. The clutch should be checked during the first hour of cutting and periodically each week. An additional set of scribe marks can be added to check for slippage. See Figure 5-11 on page 47 to adjust spring length. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 51 Reassemble each friction disk (#4) next to the metal plate it was separated from. Install bolts (#3) through end plates and intermediate plates as shown. Place springs (#2) over the bolts and secure with nuts (#1). 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 52 3 and 1/6 revolutions, “B” = 5.5 mm (0.217”). If a higher torque is needed, then tighten nuts another 1/6 of a revolution, Do not set gap “B” smaller than 5 mm (0.197"). RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 53: Long Term Storage

    Store cutter on a level surface in a clean, dry place. Inside storage will reduce maintenance and make for a longer cutter life. 8. Follow “Unhook Rotary Cutter” instructions on page 28 when disconnecting tractor from cutter. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 54 Table of Contents Section 5: Maintenance & Lubrication This page left blank intentionally. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 55: Lubrication Points

    Quantity = 2 pumps 30184 Repack wheel bearings annually Hours Trailing Arm Pivots 3 - zerks (1 per trailing arm) Type of Lubrication: Multi-Purpose Grease Quantity = As required 39201 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 56: Adjustable Turnbuckle

    39201 Hours Center Deck Axle Pivot 2 - zerks Type of Lubrication: Multi-purpose Grease 39201 Hours Wing Deck Axle Pivot 2 - zerks Type of Lubrication: Multi-purpose Grease 39201 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 57 Quantity = As required 37725 Needed Park Jack 1 - zerk Type of Lubrication: Multi-purpose Grease Quantity = As required Frequency = As needed and when unhooking for longterm storage. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 58: Divider Box

    Reinstall and tighten side oil level plug and oil fill/vented dipstick. Type of Lubrication: 80-90W EP Quantity = Fill until oil begins to flow out oil level plug hole in gearbox. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 59 37519 Hours Wing Driveline Joints 37514 Type of Lubrication: Multi-purpose Grease 37519 Drivelines with external profile tube grease point Hours Intermediate Driveline Joints Type of Lubrication: Multi-purpose Grease 37518 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...
  • Page 60 8 Hrs of operation. IMPORTANT: Attach safety chain (#1) to tractor frame. Attach safety chain (#2) to cutter frame. 39280 CV Driveline with overrunning clutch Figure 5-15 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 61 Steps 1 to 6 can be repeated to lubricate universal 3. Refer to Figure 5-20: Pull back on driveline shielding joint on opposite end of driveline. until CV joint is exposed. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 62: Section 6: Specifications & Capacities

    6- Wheel option: 4 on transport axle and two on wing axle Transport axle Spring-cushioned on trailing arms Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts. RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...
  • Page 63 Table of Contents Section 6: Specifications & Capacities 7'- 7 3/4" 3'- 8 1/4" 39203 2" 11'- 7 3/4" 39202 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 64: Section 7: Features & Benefits

    RC4610 and RCM4610 Models Features Benefits Surpassed rugged All Land Pride Rotary Cutters have been designed and tested and meet rigorous industry standards voluntary testing procedures according to ISO 4254-13. Factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.

  • Page 65: Section 8: Troubleshooting

    Blades have unequal weight Replace each pair of blades on affected carrier. Wing cylinder movement too slow Orifice is plugged Remove elbow fitting and unplug orifice. 1/14/19 RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:...

  • Page 66: Section 9: Torque & Tire Inflation Chart

    450 ft-lbs Blade Carrier Hub Nut 450 or 550 ft-lbs minimum Wheel Lug Nuts 85 ft-lbs Tire Inflation Chart Tire Size Inflation PSI 29" x 7.7 x 15" Aircraft tire RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M: 1/14/19...

  • Page 67: Warranty

    This Warranty is not valid unless the unit is registered with Land Pride within 30 days from the date of purchase.
  • Page 68 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA...

This manual is also suitable for:

Rcm4610

Table of Contents