Table 7- 3 Logger Control Menu Option List - Siemens SITRANS FUE1010 IP65 NEMA 4X Operating Instructions Manual

Logger Control
To access the [Logger Control] menu the [Meter Facilities] menu must be selected.
1. From the Meter Facilities menu access the [Logger Control] menu by pressing the <Right
Arrow>.
2. Scroll down to [Logger Control]. Press the <Right Arrow> to access the [Logger Control]
menu option list.
Table 7- 3
Logger Control
Display Logger
This menu cell is essentially a duplicate of the menu cell in Logger Setup. It allows you to
send the Logger contents to the display screen. This command is effective only after a
successful install. In addition, you have to enable datalogging and select items in the [Logger
Setup] menu. Note that this command transmits the data from both paths. You can set the
report to scroll on the screen with or without line wrap.
FUE1010 IP65 NEMA 4X
Operating Instructions, 12/2014, A5E03086491-AC
Logger Control Menu Option List
Display Logger
Output Logger
Circular Memory (Available for
Multi-Path units only)
Est LogTime Left
Clear Logger
Functions
7.3 Logger Control
Off
Line Wrap
No Line Wrap
No
Yes
No
Yes
--:--
No
Yes
107