Siemens SITRANS FUE1010 IP65 NEMA 4X Operating Instructions Manual page 59

①
②
③
Figure 5-8
Mounting Supplies
The following items will be needed to mount the sensors (most are supplied):
● Flat blade screwdriver
● Mounting Frames or Mounting tracks
● Tape, chalk and a ruler or measuring tape
● Mounting Straps
● Spacer Bar
● Mounting Guide (for Direct Mount)
● Ultrasonic coupling compound and/or coupling pads
● Sensors (matched set)
Mounting Strap Kits
The available Mounting Strap kits are listed below. Each kit comes with up to two band sizes
to cover its designated pipe diameter range and a spacing guide for Direct Mount.
Mounting Strap Kits
7ME396000SM00
7ME396000SM10
7ME396000SM20
7ME396000SM30
FUE1010 IP65 NEMA 4X
Operating Instructions, 12/2014, A5E03086491-AC
Upstream Sensor
Pipe
Flow Direction
Direct Mount (Pipe shown from above in 12 o'clock position)
50.8mm (2-inch) to 177.8mm (7-inch)
50.8mm (2-inch) to 330.2mm (13-inch)
330.2mm (13-inch) to 609.6mm (24-
inch)
609.6mm (24-inch) to 1219.2mm (48-
inch)
④
Downstream Sensor
⑤
Sonic path
Pipe Diameter
Connecting
5.5 Sensor Installation
SAE Band Sizes (Qty.)
#88 (2) #128 (2)
#88 (2) #152 (2)
#188 (2) #280 (2)
#152 (4) #312 (4)
57