Installing The Router In A Rack - HP A6604 Installation Manual

Figure 4-3 Install the cable management bracket for the A6608
(1) Left mounting bracket
Step2 Install the mounting brackets to the router
Before installing the router in the rack, fix the left and right mounting brackets respectively to the
left and right sides of the front panel of the router.
brackets.
Figure 4-4 Install the mounting brackets to the A6608

Installing the Router in a Rack

Follow these steps to install the router in a rack:
Step1 Check the grounding and stability of the rack.
Step2 Install a support tray on the rack for the router. Skip this step if a support tray is already
installed.
Step3 Use screws to fix the mounting brackets onto both sides of the front panel of the router. Refer
to "Installing Mounting Brackets onto the
Step4 Put the router on the support tray and slide the router along the slide rails to an appropriate
place.
(2) Cable management bracket
Figure 4-4 shows how to install the mounting
Router" on page 4-4 for the installation.