TechniSat DIGITRADIO 10 C Instruction Manual page 143

Symptom
Bad Bluetooth connection and
dropouts
No sound from the external input
(AUX).
Device automatically switches to
standby
If the malfunction has not been resolved, even after performing the checks
described, please contact the Technical Hotline.
Possible cause/remedy
Do not exceed the maximum range for
Bluetooth of 10m.
Is the device connected correctly?
Has AUX been selected as the input source?
Has playback been started on the external
device and has the
output volume been set?
The auto-standby function automatically
switches the device to standby after approx.
15 minutes in the following circumstances:
No sound is played
No device is connected via Bluetooth when
the device is in Bluetooth mode
Volume is muted.
DE
EN
FR
NL
143