TechniSat DIGITRADIO 10 C Instruction Manual page 106

5.4.2 Switching off the device
> By briefly pressing the On/Standby button you can switch the device to
standby mode. [Standby] appears briefly on the display. The date and time
are shown on the display. The display brightness in standby mode can be
adjusted as described in Section 11.2.
> Pressing and holding the On/Standby button will put the device in power-
saving mode and the display will go off. [Power off] appears briefly on the
display.
5.4.3 Selecting the source
> Press the MODE button (25) to switch between the DAB+ (Digital Radio), FM
and Bluetooth sources. Press the button repeatedly to do so.
The sources are shown using an icon.
DAB+
106