TechniSat DIGITRADIO 10 C Instruction Manual page 142

13 Troubleshooting
If the device does not operate as intended, check the following table for information.
Symptom
The device cannot be switched on. The device is not being supplied with power.
No sound can be heard.
The display does not switch on.
Poor reception via DAB+/FM.
The device cannot be operated.
142
Possible cause/remedy
Connect the power supply unit correctly to the
socket and to the device.
Increase the volume.
Disconnect the device from the power supply
and then reconnect it.
Fully extend the antenna. Change the position
of the antenna or the DIGITRADIO 10 C.
Disconnect the device from the power supply
and then reconnect it.