TechniSat DIGITRADIO 10 C Instruction Manual page 140

> The display will show [Restart ...] and the device will start with the language
selection [Language]. Use  /  to select one of the available languages and
confirm by pressing the OK button. The device then automatically performs a
complete scan in DAB mode. While scanning, the display information shows
the progress as well as the number of digital radio stations detected. After
completing the station scan the first DAB+ channel is played.
11.5 SW version
Under SW Version you can check which SW version is currently installed.
> Press the MENU button and use the  /  buttons to select [System Settings]
> [SW Version] and press OK.
> The current software version is displayed.
11.6 SW update
The SW update option is used to update the device software and is only intended for
use when servicing.
140