TechniSat DIGITRADIO 10 C Instruction Manual page 104

> Insert the batteries (2 x AAA 1.5V) in accordance with the polarity indicated in
the battery compartment.
> Close the battery cover carefully until the lugs on the lid of the housing snap
shut.
You need an alkaline battery, type Micro, 1.5 V, LR03/AAA, to operate the
remote control. Make sure that the polarity is correct when inserting the
battery.
Replace batteries that are losing charge before they are spent.
Leaking batteries may damage the remote control.
If you are not going to use the device for an extended period, remove the
batteries from the remote control.
Important instructions for disposal: Batteries may contain toxins that are
harmful to the environment. Therefore, it is imperative to dispose of the
batteries according to the legal provisions in force. Never dispose of batteries
in normal household waste.
104