TechniSat DIGITRADIO 10 C Instruction Manual page 122

8.3 Automatic station scan
> Press the SCAN button to automatically search for the next station with
sufficient signal intensity.
If a FM station with sufficient signal strength is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, the radio text.
Please use the manual station scan for setting weaker stations.
8.4 Manual station scan
> Press the  /  buttons repeatedly to set the desired stations or frequency.
The display shows the frequency in increments of 0.05 MHz.
8.5 Scan settings
In this menu item it is possible to set the sensitivity of the scan.
> Press the MENU button and select the [Scan Settings] item.
122