Table of Contents
Advertisement
Quick Links
™
OPTIREG
linear voltage regulator TLS8xxx2ELVxx
demoboard
Z8F61720705
Preface
Scope and purpose
This document provides information about the usage of the demoboards for the low dropout linear voltage
regulators
•
TLS820B2ELVSE
•
TLS820D2ELVSE
•
TLS835B2ELV
•
TLS835B2ELVSE
•
TLS835D2ELVSE
in a PG-SSOP-14 package from Infineon Technologies AG.
Intended audience
This document is intended for engineers who develop applications.
User manual
www.infineon.com/OPTIREG-linear
Please read the Important Notice and Warnings at the end of this document
Rev. 1.1
2021-06-24
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Infineon OPTIREG TLS8 2ELV Series
Summary of Contents for Infineon OPTIREG TLS8 2ELV Series
-
Page 1: Preface
TLS835B2ELV • TLS835B2ELVSE • TLS835D2ELVSE in a PG-SSOP-14 package from Infineon Technologies AG. Intended audience This document is intended for engineers who develop applications. User manual Please read the Important Notice and Warnings at the end of this document Rev. 1.1 www.infineon.com/OPTIREG-linear... -
Page 2: Table Of Contents
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Table of contents Table of contents Preface .................1 Table of contents . -
Page 3: Introduction
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Introduction Introduction Feature sets and packages Table 1 shows an overview of the feature sets and packages in the TLS8xxx2ELVxx voltage regulator family. Table 1 Feature sets and packages Type Package Output current Enable Reset Output voltage... -
Page 4: Block Diagram
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Introduction Block diagram Figure 1 shows the block diagram of TLS835D2ELVSE, which offers the full feature set. Current Limitation Reset RADJ Enable Bandgap Reference Temperature Shutdown Figure 1 Block diagram of TLS835D2ELVSE User manual Rev. -
Page 5: Demoboard
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard Demoboard ™ The OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard is available for all devices of the TLS8xxx2ELVxx voltage regulator family in a PG-SSOP-14 package, see Table Operating conditions To avoid electrical damage of the demoboard, the operating range defined in Table 2 must be followed. -
Page 6: Jumper Settings For All Variants
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard 2.2.1 Jumper settings for all variants Header X7 (Input capacitor C1) A capacitor C1 of 47 µF can be connected to VIN by placing a jumper on X7. Header X8 (Enable function) EN input pin can be configured by X8. -
Page 7: Jumper Settings Tls820B2Elvse, Tls835B2Elvse
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard 2.2.2 Jumper settings TLS820B2ELVSE, TLS835B2ELVSE Headers X9 (selectable output voltage) The output voltage can be configured via X9. Table 4 Header X9 options for selectable output voltage Function SEL ↔ VOUT Sets VOUT to 5 V SEL ↔... -
Page 8: Jumper Settings Tls820D2Elvse, Tls835D2Elvse
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard 2.2.3 Jumper settings TLS820D2ELVSE, TLS835D2ELVSE Headers X9 (selectable output voltage) The output voltage can be configured via X9. Table 5 Header X9 options for selectable output voltage Function SEL ↔ VOUT sets VOUT to 5 V SEL ↔... - Page 9 ™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard Figure 3 TLS820D2ELVSE, TLS835D2ELVSE default jumper setting User manual Rev. 1.1 2021-06-24...
-
Page 10: Jumper Settings Tls835B2Elv
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard 2.2.4 Jumper settings TLS835B2ELV Headers X9 and X10 (Adjustable output voltage) The output voltage can be configured via X9, X10 and voltage divider R3, R4. Table 8 Headers X9 and X10 options for adjustable output voltage X9 / X10 Function X9: SEL ↔... -
Page 11: Signal Access
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Demoboard 2.2.5 Signal access The connectors X13, X14 and X15 offer easy signal access, for example for probes of an oscilloscope. Table 9 Signals on connector Connector Accessible signal • GND (ground) •... -
Page 12: Schematic And Layout
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Schematic and layout Schematic and layout Schematic Figure 5 Schematic User manual Rev. 1.1 2021-06-24... -
Page 13: Layout
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Schematic and layout Layout Figure 6 Top layer Figure 7 Bottom layer User manual Rev. 1.1 2021-06-24... -
Page 14: Bill Of Materials
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Bill of materials Bill of materials Table 10 Bill of materials Part Value Package one of the following: PG-SSOP-14 • TLS820B2ELVSE • TLS820D2ELVSE • TLS835B2ELV • TLS835B2ELVSE • TLS835D2ELVSE banana jack BABU4MM banana jack BABU4MM banana jack... -
Page 15: Restrictions
This demoboard offers limited features only for evaluation and testing of Infineon products. The demoboard is not an end product or finished appliance, nor is it intended or authorized by Infineon to be integrated into end products. The demoboard may not be used in any production system. -
Page 16: Revision History
™ OPTIREG linear voltage regulator TLS8xxx2ELVxx demoboard Z8F61720705 Revision history Revision history Revision Date Changes 2021-06-24 TLS820D2ELVSE added 2018-05-15 Document created User manual Rev. 1.1 2021-06-24... -
Page 17: Disclaimer
Infineon Technologies, All Rights Reserved. of any kind, including without limitation warranties of Infineon Technologies’ products may not be used in non-infringement of intellectual property rights of any any applications where a failure of the product or third party.
Need help?
Do you have a question about the OPTIREG TLS8 2ELV Series and is the answer not in the manual?
Questions and answers