Chassis and turret
Wheel replacement
Chassis and turret
Wheel replacement
1 - You will need
• Standard tool kit
• Protective goggles
• Gloves
• Jack
• Hoist
• Torque wrench
2 - Preliminary operation
For safety reasons, imperatively respect the following stages during the tests :
• To set up a beaconing of safety around the test area.
• Put the machine in stowed position.
The operations of disassembling if they exist should be carried out only on the installations completely disconnected
and must be entrusted only to people having the necessary technical training.
Respect, in addition to the instructions appearing in the present instructions, the legal tendencies generally applicable
for safety accident prevention.
All the precautions must be done in work before intervening on and near the machine.
After completion of work, all the covers and safety devices must be positioned back completely and operational.
3 - Technical specifications
Characteristics
Type
Wheel mass
Size
4001055180
E 06.21
• Place barriers around the perimeter of the work area
Standard wheel
Solid tires/tyres
278 kg +/- 6 kg (613 lbs +/- 13 lbs)
1025/365 mm (3 ft 4 in / 1 ft 2 in)
USA / GB
MS0123
149