Table of Contents
Advertisement
H14TX - HB40 - H16TPX - HB44J
C
- Maintenance
7 - Maintenance sheets
Each specific procedure is described in the following maintenance instructions.
Before performing any maintenance interventions, place the machine in maintenance configuration.
Report that the machine is under maintenance by tagging the platform and ground control boxes.
Using the machine during maintenance is strictly forbidden.
Return the machine to operating configuration after maintenance has been completed.
N.B.-:-For Russia and the Ukraine only : All the fillings, drain and lubrication points (tanks caps, engines
drain plugs, ...) are red.
7.1 -
PLACING THE MACHINE IN MAINTENANCE CONFIGURATION
1.
Place the machine on firm, level ground.
2.
Stow the machine completely.
3.
Push the E-stop push-button to cut off the electricity supply.
4.
Insert the turntable rotation locking pin.
7.2 -
PLACING IN OPERATING CONFIGURATION
1.
Remove the turntable rotation locking pin.
2.
Pull the E-stop button.
4000364740
E12.14
49
US/GB
A
B
C
D
E
F
G
H
I
Hide quick links:
Advertisement
Table of Contents
