Electric Shock Hazards - Haulotte HA26 RTJ O Maintenance Book

HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW -
HA80 RTJ O - HA80 RTJ PRO
B
- Safety
1.3 - E
LECTRIC
The machine is not electrically insulated and does not provide protection from contact or proximity to
electrically charged conductors.
Always position the lift at a safe distance from electrically charged conductors to ensure that no part of
the machine is within an unsafe area.
Respect the local rules and the minimum safety distance from power lines.
Electric voltage
0 - 300 V
300 V - 50 kV
50 - 200 kV
200 - 350 kV
350 - 500 kV
500 - 750 kV
750 - 1000 kV
N.B.-:-T
HIS TABLE IS APPLICABLE
Do not operate the machine :
• Do not operate the machine when close to live power lines, consider the
movement of the machine and the sway of the electric power lines particularly
in windy conditions.
• Do not operate the machine during lightning, thunderstorms, snow/ice or any
weather condition that could compromise operator safety.
• Do not operate the machine during lightning or storms.
• Do not use the machine as a welding earth.
• Do not wash electrical components with a high pressure washer.
• Do not weld on the machine without first disconnecting the battery terminals.
• The machine must not be used while charging the batteries.
• When using the platform AC power line, ensure it is protected with a circuit
breaker.
Keep away from the machine if it contacts energized power lines. Personnel on
the ground or in the platform must not touch or operate the machine until
energized power lines are shut off.
In the event of accidental contact with a high voltage line, wait for the power to
the line be de-energized before attempting to operate the machine.
4001055180
S H
HOCK AZARDS
Minimum safe approach distances
,
EXCEPT WHEN THE LOCAL REGULATIONS ARE MORE STRICT
E 06.21
Minimum safety distance
Mètre
Avoid contact
3
5
6
8
11
14
Feet
10
15
20
25
35
45
.
USA / GB 15