HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW -
HA80 RTJ O - HA80 RTJ PRO
D
- Inspection and maintenance schedule
3 - Preventive maintenance
Maintenance operations must be carried out by a qualified technician chosen by the owner and ensure that the
machine operates correctly.
Severity of operating conditions may require a reduction in time between maintenance periods.
Maintenance operations performed must be recorded in a register / log book of the machine.
The information contained in our manual is to be complemented by the information found in the engine
manufacturer's maintenance manual, which can be found on the link in the associated maintenance sheet
MS0238.
Oil change
Levelling
Lubrication-Lubrication
First 50H
Chassis assembly : Wheel, reducer, steering, wheel pivot
Tighten the wheel nuts
KUBOTA WG2503 engine
Drain the engine oil
Replace the oil filter
KUBOTA V2403M / V2403CR T4B / V2403CR T5B engine
Drain the engine oil
Replace the oil filter
Hydraulic : oils, filters and hoses
Replace the hydraulic filter
104
4001055180
Symbol meanings
To check by test
Visual inspection
Preventive Maintenance Level 1 - First 50H
Page or
associated
procedure
MP0001
MP0036
MP0004
MP0036
MP0004
MP0006
E 06.21
Tightening
Functional adjustments / Checks /
Cleaning
Systematic replacement
OK
NOK
Comments
USA / GB