Coolant; Cylinder Storage Oil - Haulotte HA26 RTJ O Maintenance Book

HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW -
HA80 RTJ O - HA80 RTJ PRO
C
- Familiarization
4.5 - C
OOLANT
Always use a 50/50 blend of coolant and clean soft water.
The coolant is available in different types. For this engine, use the ethylene glycol type (EG).
The procedure for the blend of water and antifreeze differs according to the manufacture of the
antifreeze. Refer to standard SAEJ1034 and more precisely SAE J814c.
N.B.-:-R
EFER TO
Antifreeze volume (%)
50
Never add a different brand of coolant. The different brands may have different additive components, and
the engine may fail to perform as specified. When the liquid is mixed, do not use any radiator cleaning
agent. If the liquid is mixed with a cleaning agent, an emulsion may form and the engine components may
be damaged.
4.6 - C
YLINDER STORAGE OIL
If a cylinder is not used, the surface of the cylinder rod may be exposed to a corrosive environment
(Example : When new equipment is stored before shipping. ).
1 time per month, apply oil diluted in a solvent (Recommendations : UNIL OPAL PROTECT SHX 12).
Procedure :
• Wash the machine completely to remove any trace of harsh environmental pollution. Clean the
cylinder rods, which are sensitive to corrosion, using clean water.
• Perform a dynamic test. For each cylinder perform a movement from stop to stop ( 3 times each
movement).
• Dry the cylinder rods.
• Grease the cylinder rods with protective oil (See recommendations)
• Verify absence of any oil leaks.
N.B.-:-R
EFER TO
100 4001055180
C
ONSOMMABLES
Freezing point
° C ° F
- 37 - 34
C
ONSOMMABLES
E 06.21
Boiling point
° C ° F
108 226
USA / GB