Specifications - Evinrude 30 HORSEPOWER MFE Operator's Manual

30 MFE Models
Displacement
Engine Type
Full Throttle Operating
Range
(1)
Power
Idle RPM in Neutral
Ignition Timing
Emission Control System:
per SAE J1930
Fuel Requirements
Oil
– Lubricant
– Capacity
Warning Signals
Spark Plug
Fuel Filter
Gearcase
– Lubricant
– Capacity
– Gear Ratio
Propeller
Weight
Sound at Drivers Ear
(LpA) ICOMIA 39.94
Transom Height
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.

Specifications

35.1 cu. in. (576 cc)
In-line, 2 Cylinder, Two-Cycle, Evinrude E-TEC
5500 to 6000 RPM
30 HP (22.1 kw) @ 5500 RPM
750 ± 50
EMM controlled, not adjustable
ECM, E-TEC (Engine Control Module, E-TEC)
Heavy Fuels— JP4, JP5, JP8, Jet A, Jet B, Kerosene
Gasoline—87 Pump Posted AKI (90 RON)
– Refer to Fuel Requirements on page 14
Evinrude/Johnson XD100 oil 
– Refer to 2–Stroke Engine Oil Requirements on page 18
1.5 qt. (1.4 l)
Controlled by the outboard's EMM
Refer to Parts Catalog for engine model
In-line Replaceable
Evinrude HPF Pro
11 fl. oz. (325 ml)
0.465 / 13:28 / 2.15:1
Refer to Propeller Selection on page 56
MRL Models 160.5 lbs. (72.8 Kg)
80 dB(A)
MAL/MRL Models – 19.5 to 20 in (495 to 508 mm)
59