Power On - Toshiba TS1000 Startup Manual

2.

Power ON

2.1 Power ON
!
CAUTION
POWER
SERVO SERVO
ON OFF
RUN STOP
TEACHING
INTERNAL
MODE
EXT. SIGNAL
EXT. HOST
When the power is turned on, the POWER lamp is illuminated.
POWER
SERVO SERVO
ON OFF
STOP
RUN
TEACHING
INTERNAL
MODE
EXT. SIGNAL
EXT. HOST
If an error has occurred or if the POWER LED equipped
on the control panel will not illuminate when the main
power switch of the controller was turned on, turn the
power off immediately and check for the wiring.
Otherwise, you will be involved in an electric shock or a
fire.
When the power is turned on, the controller enters a
program reset status.
EMERGENCY
UF1
CYCLE UF2
ALARM
SELECT
RESET
LINE
USER
ALARM
Robot Controller
EMERGENCY
UF1
CYCLE
UF2
SELECT
LINE
USER
ALARM
Turn on the controller power.
After power ON, the controller
performs self-check. After the
processing of start has finished,
ALARM
RESET
both the STOP and SERVO
OFF lamps are illuminated in
red.
– 13 –
STARTUP MANUAL
STE 71282