EFI Pro 32r Operation Manual page 87

5.3.3 Nozzle Test
Carry out a nozzle test to check that all the nozzles are clear of any obstruction and that the ink is passing through them.
1. Conduct the nozzle test from the Nozzle Test group on the Front-end window's control panel.
2. In the Step Offset To The Right field, select the required offset for the nozzle test on the media.
3. Choose Print Nozzle Test. The nozzle test is printed. (See samples on following pages.)
Document ID: OMM-00165 Rev. C
Figure 5-15 : Nozzle Test with No Missing Data
Pro 32r Operations Guide
Printer Setup
87