EFI Pro 32r Operation Manual page 51

4.2.3 Left-Right Calibration Dialog
This dialog sets the position of heads firing during bi-directional printing, in units of pixels. Opens via the Left-Right icon on the Front-
end window's Control Panel or from the Calibrations options in the Tools menu.
1 Print Mode – Select the Print Mode to calibrate.
2 Difference – There are four optional carriage
speeds for each print mode. Speed is predefined in
the Print Mode list and is usually set to Fast. Make
sure to insert values in the correct spin box.
Document ID: OMM-00165 Rev. C
1
2
3
4
Figure 4-5 Left-Right Calibration
3 Speed - Carriage speed in which you are printing: Slow, Normal,
Quick, and Fast.
4 Set the Step Offset to the Right – Sets the location of the
pattern on the media width.
5 Test Print – Print the Left-Right Calibration test pattern.
Pro 32r Operations Guide
Software Overview
5
51