EFI Pro 32r Operation Manual page 127

The media is fed to the printer from the media roll on the rear air shaft, through the pinch roller, above the tension roller,
over the print table. From the print table, through the front tension roller, over the pinch roller to the air shaft. See
6-30
for options on the media path.
Operator Workstation
Document ID: OMM-00165 Rev. C
FRONT
Tension
(T) Roller
Pinch
Roller
Purple Line =
Media Face In
Air Shaft
Print
Shaft (Y)
Table
Media Face Out
Air Shaft
Figure 6-30
Pro 32r Operations Guide
Printer Operations
REAR
Roller
Pinch
Roller
Blue Line =
Figure
127