Table of Contents
Advertisement
The white ink system is independent of the color ink system. It has a separate vacuum generator and the vacuum level for the white SITs
should be set separately.
The white ink system incorporates additional hardware (separate valve, stirrer, degassers, etc.) to enable stirring the white ink in the main
tank and in the ink in the tubes. The purpose of stirring is to avoid sedimentation that can cause nozzle clogging.
The stirring of ink in the tank is controlled by the software.
1.
Before printing with white ink, go to Tools > White Ink Stirring.
2.
Select both ON radio buttons to stir the White Ink, and close the dialog. This process takes a few seconds, but you can continue
working while it takes place.
Document ID: OMM-00165 Rev. C
Figure 6-16 : White Ink Stirring Dialog Box
Pro 32r Operations Guide
Printer Operations
117
- Quick Links:
- Before Starting
- Ink Systems
Hide quick links:
Advertisement
Table of Contents
