Printer Rollers And Shafts - EFI Pro 32r Operation Manual

3.2

Printer Rollers and Shafts

The Printer comprises a rear set and a front set of the following:
• Air Shaft
• Pinch Roller
• Tension Roller
3.2.1 Air Shaft
• The media is loaded on the rear air shaft and collected on the front air shaft.
• The rubber bladders on the air shaft expand when filled with air in order to hold the loaded media core in place.
• There is a ruler on each end of the air shaft to show the location of the media edge relative to the shaft.
Document ID: OMM-00165 Rev. C
Rubber Bladder
Ruler Air Inlet
Figure 3-4
Pro 32r Operations Guide
Hardware Overview
Air Outlet
25