EFI Pro 32r Operation Manual page 54

1 Add job to Job Queue
3 Remove job from any pane.
5 Move job down in Job Queue.
7 White Pane. Displays the print jobs waiting in the print
queue. Right-click on a Job to enable the following:
• Open Job Settings
• Remove Job
• Set the order within the queue.
• Change Job Status to Hold or Waiting.
• Cancel Job – Drops the Job to the Red Pane
9 Green Pane. Displays the print jobs that have been
successfully printed.
11 Ink Tank Status. Indicates the amount of ink present in
each of the main ink tanks.
13 Printer Statuses.
The printer is not yet initialized.
The printer is ready to work.
The printer is printing.
Document ID: OMM-00165 Rev. C
2 Combine Jobs. Print more than one job simultaneously, on
more than one roll.
4 Move job up in Job Queue.
6 Stops the queue printing after one job.
8 Red Pane. Displays the failed/canceled print jobs (i.e. those
for which printing was not completed).
10 Media Status. Displays the location and width of the media.
12 When turning on the printer, the SITs begin to heat up to
the required temperature.
When the Printer Status is orange, it indicates
that the printer is warming up.
When the system is ready for printing, the
printer status bar turns from orange to green,
indicating that the required temperatures have
been reached. The printer status bar indicates
that the printer is ready.
If the temperature of any of the inks does not reach the
required level, the status bar remains orange.
Double-click status bar to open Printer Status dialog box.
Pro 32r Operations Guide
Software Overview
54