Trigger Configure Functions For Line Scan Camera - DAQ SB3-FRM13 K Series User Manual

(4) "UART Send" button
Send the UART data.
(5) "UART Get" button
Get the data from UART buffer.
(6) "UART Clear" button
Clear the UART Receiver buffer.
5.5 Trigger Configure Functions for :Line Scan Camera
(1) "Line Scan Camera" toggle
If the box clicks, you can use a Line Scan Camera. Otherwise, you can use an Area Scan
Camera.
(2) "Page Start" button
You can select Continuous, Page Trig, Z Phase modes.
Continuous --- Free Run Mode. It is used an internal 50MHz clock.
Page Trig --- It is used a control signals of external board.
Z Phase --- It is used an external motor or a Z-Phase of encoder.
(3) "# of Line" button
It is a Line number, you can select 1 ~ 65536.
USB3-FRM13_K Users Manual (Rev 1.0)
35
- - http://www.daqsystem.com