Multi-Board Functions; Status Functions - DAQ SB3-FRM13 K Series User Manual

(15) "Full screen" toggle
It shows full screen.
(16) R/B Change
The image color can be changed (Red <-> Blue).
(17) "use DVAL" toggle
If the box clicks, you use the Data Valid signal.
If the box don't click, you use the HSYNC(Horizontal Synchronization) signal.
(18) "inv HS" toggle
If the box clicks, you use the inverse HSYNC signal.
If the box doesn't click, you use the HSYNC signal.

5.2 Multi-board Functions

(1) "Use Multi Board" toggle
Select a multi-USB3.0 board.
(2) "Board # :"
It selects a board number in case of the multi USB3.0 boards. It can select 0 ~ 4 at currently.

5.3 Status Functions

(1) "Ver."
It shows the version of FPGA and Firmware.
USB3-FRM13_K Users Manual (Rev 1.0)
33
- - http://www.daqsystem.com