Page 1
Information furnished by DAQ system is believed to be accurate and reliable. However, no responsibility is assumed by DAQ system for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or copyrights of DAQ system.
INT sources in Chip From Ext. [Figure 1-1. PCIE-DIO05 Internal Block Diagram] The PCIe-DIO05 is a board having the function of external with the 32 TTL level input port. This product is designed for High speed digital data logger with PCI Express Interface.
Page 6
PCIe-DIO05 Users Manual (Rev 1.1) DIN6 Digital Input 6 DIN8 Digital Input 8 DIN10 Digital Input 10 DIN12 Digital Input 12 DIN14 Digital Input 14 DIN16 Digital Input 16 DIN18 Digital Input 18 DIN20 Digital Input 20 DIN22 Digital Input 22...
To install your PCIe-DIO05 board in your PC, follow the steps described in the document “How to install PCI DAQ Board” provided by DAQ System. If the document is missing, you can get it from www.daqsystem.com. The PCIe-DIO05 board is completely Plug & Play. There are no switches or jumpers to set.
Page 8
PCIe-DIO05 Users Manual (Rev 1.1) The driver folder includes a file of “pci_aio05.inf” and “pci_aio05.sys” that it is necessary for driver installation. A warning message appears during installation here, press “Continue Anyway” button. You can show below message window. The process progress as follows.
Page 9
If the installation is completely finished, you can show below message window. If the installation is completely finished, you confirm it in the following ways. Do the following steps to show up the “Device Manager” window. [My Computer -> properties -> Hardware -> Device Manager -> Multifunction Adaptors -> PCIe-DIO05] http://www.daqsystem.com...
Page 10
PCIe-DIO05 Users Manual (Rev 1.1) If you can see the “PCIe-DIO05” at Multifunction Adaptors, the driver installation is to have been over. (Check the red circle) Notice : After installation, you should re-boot the system for the proper operation. http://www.daqsystem.com...
PCIe-DIO05 Users Manual (Rev 1.1) 4. Board Function In this chapter, the primary functions of the board are described briefly. For more information, refer to the device specification. 4.1 Layout [Figure 4-1. PCIe-DIO05 Front side] The board has three LEDs to indicate the operation status.
PCIe-DIO05 Users Manual (Rev 1.1) 4.2 Function Description (1) FPGA All of the board functions are controlled the FPGA Logic. (2) Buffer It receives external digital input. (3) Regulator A power supplies to the board. (4) PCI Express Chipset It’s a PCI Express Bridge.
PCIe-DIO05 Users Manual (Rev 1.1) 5. Sample Program DAQ system provides a sample program to make the user be familiar with the board operation and to make the program development easier. You can find the sample program in the CDROM accompanying with the board.
PCIe-DIO05 Users Manual (Rev 1.1) (1) Select Data Size It set up data size of input. The data can be input in 32 bits unit. It is transmitting to PC from PCIe-DIO05 with fixed size. (2) Stop/Run Stat/Stop Data collection (3) Get Data Get the data on the board.
PCIe-DIO05 Users Manual (Rev 1.1) References 1. PCI System Architecture -- MindShare Inc. 2. PCI Local Bus Specification -- PCI-SIG 3. General information on PCI board API -- DAQ system 4. AN201 How to build application using APIs -- DAQ system 5.