Installation; Package Contents; Installation Sequence - DAQ SB3-FRM13 K Series User Manual

4. Installation

After unpacking, inspect the board to make sure there are no damages on the package.

4.1 Package Contents

Product Contents
1. USB3-FRM13_K Board
2. USB3(A-B) Cable
3. CD (Driver/Manual/API/Samples etc.)

4.2 Installation Sequence

To install USB3-FRM13_K board in your environment, do the following steps. The USB3-
FRM13_K board is completely Hot-Plug and Plug & Play. Therefore, you can install it easily.
The required PC operating system for the USB3-FRM13_K is Windows 2000 SP4 or Windows
XP SP1 higher. The USB3-FRM13_K uses USB Super Speed interface thus "xxx USB 3.0 Root
Hub" should be installed in your PC. You can check this condition by doing the following steps.
[Figure 4-1. "Device Manager" window]
24
- -
USB3-FRM13_K Users Manual (Rev 1.0)
http://www.daqsystem.com