Introduction - DAQ SB3-FRM13 K Series User Manual

1. Introduction

USB3-FRM13_K is an image acquisition board to support Full configuration camera Link compatible
cameras. Acquire images in real time and directly transferred to the system memory. Easy installation
and fast image transfer is a suitable device to meet the needs of the industry's low-cost, high-efficiency.
DAQ system provides a sample program to use the board briefly so you can test the API provided
insource form, so the user can be used to modify. Please refer to Chapter 5 for a detailed description of
this sample program.
Mini MDR 26-pin connector connects to Camera Link compatible camera. The bottom connector(J8)
connects to Base Camera Link Configuration. The upper connector(J4) connects to Full/Medium
Camera Link Configuration with bottom connector. In addition, by providing four pairs RS-422 signal
lines and Line/Area Trigger signals of 6 TTL level, have the ability to control the external. Please refer
to Chapter 3.3 for a detailed description of this connectors.
The image frames that took in conjunction with a standard Camera-link send to PC by Super
Speed(5Gbps) USB3.0 interface method. The board operation is controlled by the program API, the
figure below shows a picture of the interlocking action of the board.
[Figure 1-1. USB3-FRM13_K Board Usage]
3
-
USB3-FRM13_K Users Manual (Rev 1.0)
- http://www.daqsystem.com