Image Functions - DAQ SB3-FRM13 K Series User Manual

(Notice) The running order for the sample program as
"Device Open" click  "Device Init" click  Select Mode "8, 16, 32, 64"
 Get Resolution  "Start" click  "View" Click or "Auto" check

5.1 Image Functions

(1) "Open" button
It starts a selected board device.
(2) "Close" button
It stops a selected board device.
(3) "Device Init" button
Press this button to initialize the function of receiving image frame data. It is performed only
once after power is applied to the board.
(4) "Mode" Selection
It selects a Video Data Mode of 8bit, 16bit, 32bit, 64bit, 80bit.
Ex) Base Configuration : 8bit, 16bit, 32bit(MSB 8bit ignored)
Full Configuration : 64bit, 80bit
(5) "Get Res." button
It shows the image resolution.
(6) "Start" button
It starts the image transfer. It is a Toggle button, press again stop the image transferring.
(7) "Once" button
When press this button, it displays a freeze-frame.
(8) "View" button
Start the image transmission.
USB3-FRM13_K Users Manual (Rev 1.0)
31
- - http://www.daqsystem.com