Functional Blocks - DAQ SB3-FRM13 K Series User Manual

3.2 Functional Blocks

(1) MDR-26 Connecter : J1, J2
Camera Link Base (J1), medium/Full (J2) Signal Connector
(2) LVDS Link : U2, U3, U4
It is protected a circuit that the interface of high voltage higher than 3.3V CMOS Logic is
exchanged to normal 3.3V Logic Level.
(3) FPGA : U6
All of the functions are controlled by the logic program of the FPGA.
(4) Regulator : U14, U20, U21
The Regulator is for supplying the power (3.3V) to the board.
(5) USB 3.0 Interface Chipset : U10
This block supports USB3.0 Super Speed interface.
(6) DDR Memory : REF1, REF2
After save the data in a frame unit, transfer to PC through FPGA.
USB3-FRM13_K Users Manual (Rev 1.0)
16
- - http://www.daqsystem.com