Usb3-Frm13_K Board Description; Usb3-Frm13_K Layout - DAQ SB3-FRM13 K Series User Manual

3. USB3-FRM13_K Description
In this chapter, the primary functions of the board are described briefly. For more information, refer to
the device specification.

3.1 USB3-FRM13_K Layout

The board has 6 LEDs to indicate the operation status.
D1 : turns on when power is applied to the board and the initialization ends up.
D2 : turns on when Horizontal synchronization signal detects. (Hsync)
It is a display for confirming the Hsync.
D3 : turns on when the Vertical Synchronization (Vsync) indicates a value divided by 1/16.
It is a display for confirming the Vsync.
D4 : turns on when power(3.3V) is applied to the board..
D6, 9, 12 : For Test.
[Figure 3-1. USB3-FRM13_K Layout]
15
- -
USB3-FRM13_K Users Manual (Rev 1.0)
http://www.daqsystem.com