VM162/VM172
3.3.8 SRAM Data Retention
The battery backup of the VM162/VM172 is connected to both the SRAM and RTC. This jumper gives
the user the possibility to disconnect the SRAM from the battery backup, giving the RTC longer backup
support.
Jumper
J16
3.3.9 BERR1 Timeout
This jumper sets the timeout of the BERR1 and can be used for debugging purposes.
Jumper
J17
J17, J18, J21
Set
Open
Open
Open
3.3.10 Backup Current Test Bridge
This jumper is reserved for support usage.
Jumper
J22
Page 3- 10
Setting
Description
1-2
SRAM data retention is off
1-3
SRAM data retention is on
Setting
J18
J21
Open
Open
Set
Open
Open
Set
Open
Open
Setting
Description
Set
Operating mode
Open
Test mode
© PEP Modular Computers
Chapter 3 Configuration
Description
8µs BERR1 tineout
32µs BERR1 timeout
128µs BERR1 timeout
Infinite BERR1 timeout
Default
Default
Juli 23, 1997