Related Publications - PEP VM162 User Manual

Chapter 1 Introduction
Product
SI6-10BT-IP
SI6-
DUMMY-IP
SI6-PB485-IP
SC-2321
SC-4851
CABLE-RS232
Important : The VM162 and VM172 must be ordered with a memory module (DM60x) and a front-pa-
nel with integrated SI6-piggyback module.
For configurations requiring the 2 x 50-pin D-Sub front-panel connectors instead of the flat-band cable
option, please contact the nearest PEP sales office for further information.

1.8 Related Publications

• VMEbus Specifications VME64
• IndustryPack
• CXC Specification from PEP (Version 1.5 or later)
Juli 23, 1997
10BaseT Twisted pair Ethernet interface piggyback with RJ45
connector
Front panel without networking interface(s)
Optoisolated RS485 interface piggyback with 9-Pin D-Sub
connector
Optoisolated RS232 interface piggyback with TxD, RxD, DTR and
CTS signals and Baud rate up to 38.4 kBaud
Optoisolated RS485 interface piggyback for half-duplex
communication at a Baud rate up to 38.4 kBaud
3 meter RS232 Serial Interface cable with RJ45 to 9-Pin D-Sub
(male) for terminal connection
© PEP Modular Computers
Description
VM162/VM172
Order Nr.
16147
16028
16192
12919
13468
15191
Page 1- 11